Avoid these 7 items, double the life of UV printers

The market for UV flatbed printers is becoming more and more popular, and the proportion of use is gradually increasing. Under such demand, the failure rate of UV flatbed printers is gradually increasing. What is particularly obvious is that the uv flatbed printer is damaged by improper operation, and the following points can be avoided to greatly reduce the loss.
 
First, brute force adjustment nozzle
    Although the UV tablet is a mechanical device, the structure is very powerful, but the nozzle is very fragile, because the nozzle chassis is very accurate. If you do not follow the instructions, force the external force to adjust the nozzle position, although only a little, but still A great probability of physical damage to the nozzle.
Second, ignore the work ground
    Many customers will report that the printed image has flying ink, saying that the accuracy of our UV printer is not enough. However, confirmed by the joint engineer of Feiyang, this problem is often caused by static electricity, so it is very helpful to check the connection of the grounding equipment frequently. Fortunately, the extreme UV flatbed printers are equipped with static eliminators, which can directly alleviate this problem.
Third, freely switch the circuit
    Many operators will arbitrarily install and disassemble the uv flatbed printer circuit without turning off the power switch and cutting off the main power. This kind of behavior is very undesirable, which will not only damage the service life of each system, but also harm the nozzle. Moreover, live operation poses a hazard to personal safety.
Fourth, turn off the power when cleaning
    When maintaining and maintaining the UV printer, the operation should be standardized. Please turn off the power when cleaning, pay attention to protect the circuit board and other internal systems. Also be careful not to let water touch the board and other internal systems.
Fifth, the use of poor quality cleaning fluid
Many customers will think that the cleaning liquid sold in the factory is more expensive. Anyway, there are also online sales, so I bought it. I don’t know the quality is different. I use the inferior cleaning liquid to clean the nozzle. The nozzle is very easy to be polluted and worn, because the greed is cheap, and the nozzle damage is not worth the loss.
Sixth, use inferior ink
      For the same reason, it is cheap to buy, to buy ink of unknown origin, or to use inferior ink. There are many such customers, and they are lucky. The mixing of inks in two different configurations will change the color and quality of the ink. The quality of the ink will affect the printing effect and block the nozzle, which will damage the life of the nozzle.
Seven, the wrong way to clean the nozzle
      The cleaning solution can be used to immerse the nozzle in the cleaning solution for a long time to more effectively clear the stain. However, the cleaning solution is corrosive. If the time exceeds 48 hours, it will affect the nozzle orifice itself. In case of uncertainty, be sure to contact the company's technical staff for guidance.
 
The correct use and maintenance of the uv flatbed printer not only ensures the normal high-efficiency production operation of the machine, but also prolongs the service life of the uv printer, which can greatly reduce expenses and costs.